This blob has been accessed 1,905 times via Git panel.
- # Kalasag Configuration
- #
- # IMPORTANT NOTE: You CAN NOT put spaces between your port arguments.
- #
- # The default ports will catch a large number of common probes
- #
- # All entries must be in quotes.
- #######################
- # Port Configurations #
- #######################
- #
- #
- # Some example port configs for classic and basic Stealth modes
- #
- # I like to always keep some ports at the "low" end of the spectrum.
- # This will detect a sequential port sweep really quickly and usually
- # these ports are not in use (i.e. tcpmux port 1)
- #
- # ** X-Windows Users **: If you are running X on your box, you need to be sure
- # you are not binding Kalasag to port 6000 (or port 2000 for OpenWindows users).
- # Doing so will prevent the X-client from starting properly.
- #
- # These port bindings are *ignored* for Advanced Stealth Scan Detection Mode.
- #
- # Un-comment these if you are really anal:
- #TCP_PORTS="1,7,9,11,15,70,79,80,109,110,111,119,138,139,143,512,513,514,515,540,635,1080,1524,2000,2001,4000,4001,5742,6000,6001,6667,12345,12346,20034,27665,30303,32771,32772,32773,32774,31337,40421,40425,49724,54320"
- #UDP_PORTS="1,7,9,66,67,68,69,111,137,138,161,162,474,513,517,518,635,640,641,666,700,2049,31335,27444,34555,32770,32771,32772,32773,32774,31337,54321"
- #
- # Use these if you just want to be aware:
- TCP_PORTS="1,11,15,79,111,119,143,540,635,1080,1524,2000,5742,6667,12345,12346,20034,27665,31337,32771,32772,32773,32774,40421,49724,54320"
- UDP_PORTS="1,7,9,69,161,162,513,635,640,641,700,37444,34555,31335,32770,32771,32772,32773,32774,31337,54321"
- #
- # Use these for just bare-bones
- #TCP_PORTS="1,11,15,110,111,143,540,635,1080,1524,2000,12345,12346,20034,32771,32772,32773,32774,49724,54320"
- #UDP_PORTS="1,7,9,69,161,162,513,640,700,32770,32771,32772,32773,32774,31337,54321"
- ###########################################
- # Advanced Stealth Scan Detection Options #
- ###########################################
- #
- # This is the number of ports you want Kalasag to monitor in Advanced mode.
- # Any port *below* this number will be monitored. Right now it watches
- # everything below 1024.
- #
- # On many Linux systems you cannot bind above port 61000. This is because
- # these ports are used as part of IP masquerading. I don't recommend you
- # bind over this number of ports. Realistically: I DON'T RECOMMEND YOU MONITOR
- # OVER 1024 PORTS AS YOUR FALSE ALARM RATE WILL ALMOST CERTAINLY RISE. You've been
- # warned! Don't write me if you have have a problem because I'll only tell
- # you to RTFM and don't run above the first 1024 ports.
- #
- #
- ADVANCED_PORTS_TCP="1024"
- ADVANCED_PORTS_UDP="1024"
- #
- # This field tells Kalasag what ports (besides listening daemons) to
- # ignore. This is helpful for services like ident that services such
- # as FTP, SMTP, and wrappers look for but you may not run (and probably
- # *shouldn't* IMHO).
- #
- # By specifying ports here Kalasag will simply not respond to
- # incoming requests, in effect Kalasag treats them as if they are
- # actual bound daemons. The default ports are ones reported as
- # problematic false alarms and should probably be left alone for
- # all but the most isolated systems/networks.
- #
- # Default TCP ident and NetBIOS service
- ADVANCED_EXCLUDE_TCP="113,139"
- # Default UDP route (RIP), NetBIOS, bootp broadcasts.
- ADVANCED_EXCLUDE_UDP="520,138,137,67"
- ######################
- # Configuration Files#
- ######################
- #
- # Hosts to ignore
- IGNORE_FILE="/opt/kalasag/kalasag.ignore"
- # Hosts that have been denied (running history)
- HISTORY_FILE="/opt/kalasag/kalasag.history"
- # Hosts that have been denied this session only (temporary until next restart)
- BLOCKED_FILE="/opt/kalasag/kalasag.blocked"
- ##############################
- # Misc. Configuration Options#
- ##############################
- #
- # DNS Name resolution - Setting this to "1" will turn on DNS lookups
- # for attacking hosts. Setting it to "0" (or any other value) will shut
- # it off.
- RESOLVE_HOST = "1"
- ###################
- # Response Options#
- ###################
- # Options to dispose of attacker. Each is an action that will
- # be run if an attack is detected. If you don't want a particular
- # option then comment it out and it will be skipped.
- #
- # The variable $TARGET$ will be substituted with the target attacking
- # host when an attack is detected. The variable $PORT$ will be substituted
- # with the port that was scanned.
- #
- ##################
- # Ignore Options #
- ##################
- # These options allow you to enable automatic response
- # options for UDP/TCP. This is useful if you just want
- # warnings for connections, but don't want to react for
- # a particular protocol (i.e. you want to block TCP, but
- # not UDP). To prevent a possible Denial of service attack
- # against UDP and stealth scan detection for TCP, you may
- # want to disable blocking, but leave the warning enabled.
- # I personally would wait for this to become a problem before
- # doing though as most attackers really aren't doing this.
- # The third option allows you to run just the external command
- # in case of a scan to have a pager script or such execute
- # but not drop the route. This may be useful for some admins
- # who want to block TCP, but only want pager/e-mail warnings
- # on UDP, etc.
- #
- #
- # 0 = Do not block UDP/TCP scans.
- # 1 = Block UDP/TCP scans.
- # 2 = Run external command only (KILL_RUN_CMD)
- BLOCK_UDP="1"
- BLOCK_TCP="1"
- ###################
- # Dropping Routes:#
- ###################
- # This command is used to drop the route or add the host into
- # a local filter table.
- #
- # The gateway (333.444.555.666) should ideally be a dead host on
- # the *local* subnet. On some hosts you can also point this at
- # localhost (127.0.0.1) and get the same effect. NOTE THAT
- # 333.444.555.66 WILL *NOT* WORK. YOU NEED TO CHANGE IT!!
- #
- # ALL KILL ROUTE OPTIONS ARE COMMENTED OUT INITIALLY. Make sure you
- # uncomment the correct line for your OS. If you OS is not listed
- # here and you have a route drop command that works then please
- # mail it to me so I can include it. ONLY ONE KILL_ROUTE OPTION
- # CAN BE USED AT A TIME SO DON'T UNCOMMENT MULTIPLE LINES.
- #
- # NOTE: The route commands are the least optimal way of blocking
- # and do not provide complete protection against UDP attacks and
- # will still generate alarms for both UDP and stealth scans. I
- # always recommend you use a packet filter because they are made
- # for this purpose.
- #
- # Generic
- #KILL_ROUTE="/sbin/route add $TARGET$ 333.444.555.666"
- # Generic Linux
- #KILL_ROUTE="/sbin/route add -host $TARGET$ gw 333.444.555.666"
- # Newer versions of Linux support the reject flag now. This
- # is cleaner than the above option.
- #KILL_ROUTE="/sbin/route add -host $TARGET$ reject"
- # Generic BSD (BSDI, OpenBSD, NetBSD, FreeBSD)
- #KILL_ROUTE="/sbin/route add $TARGET$ 333.444.555.666"
- # Generic Sun
- #KILL_ROUTE="/usr/sbin/route add $TARGET$ 333.444.555.666 1"
- # NEXTSTEP
- #KILL_ROUTE="/usr/etc/route add $TARGET$ 127.0.0.1 1"
- # FreeBSD
- #KILL_ROUTE="route add -net $TARGET$ -netmask 255.255.255.255 127.0.0.1 -blackhole"
- # Digital UNIX 4.0D (OSF/1 / Compaq Tru64 UNIX)
- #KILL_ROUTE="/sbin/route add -host -blackhole $TARGET$ 127.0.0.1"
- # Generic HP-UX
- #KILL_ROUTE="/usr/sbin/route add net $TARGET$ netmask 255.255.255.0 127.0.0.1"
- ##
- # Using a packet filter is the PREFERRED. The below lines
- # work well on many OS's. Remember, you can only uncomment *one*
- # KILL_ROUTE option.
- ##
- # ipfwadm support for Linux
- #KILL_ROUTE="/sbin/ipfwadm -I -i deny -S $TARGET$ -o"
- #
- # ipfwadm support for Linux (no logging of denied packets)
- #KILL_ROUTE="/sbin/ipfwadm -I -i deny -S $TARGET$"
- #
- # ipchain support for Linux
- #KILL_ROUTE="/sbin/ipchains -I input -s $TARGET$ -j DENY -l"
- #
- # ipchain support for Linux (no logging of denied packets)
- #KILL_ROUTE="/sbin/ipchains -I input -s $TARGET$ -j DENY"
- #
- # iptables support for Linux
- KILL_ROUTE="/sbin/iptables -I INPUT -s $TARGET$ -j DROP"
- #
- # iptables support for Linux (xtables-addons)
- #KILL_ROUTE="/sbin/iptables -I INPUT -s $TARGET$ -j TARPIT"
- #
- # For those of you running FreeBSD (and compatible) you can
- # use their built in firewalling as well.
- #
- #KILL_ROUTE="/sbin/ipfw add 1 deny all from $TARGET$:255.255.255.255 to any"
- #
- #
- # For those running ipfilt (OpenBSD, etc.)
- # NOTE THAT YOU NEED TO CHANGE external_interface TO A VALID INTERFACE!!
- #
- #KILL_ROUTE="/bin/echo 'block in log on external_interface from $TARGET$/32 to any' | /sbin/ipf -f -"
- ###############
- # TCP Wrappers#
- ###############
- # This text will be dropped into the hosts.deny file for wrappers
- # to use. There are two formats for TCP wrappers:
- #
- # Format One: Old Style - The default when extended host processing
- # options are not enabled.
- #
- KILL_HOSTS_DENY="ALL: $TARGET$"
- # Format Two: New Style - The format used when extended option
- # processing is enabled. You can drop in extended processing
- # options, but be sure you escape all '%' symbols with a backslash
- # to prevent problems writing out (i.e. \%c \%h )
- #
- #KILL_HOSTS_DENY="ALL: $TARGET$ : DENY"
- ###################
- # External Command#
- ###################
- # This is a command that is run when a host connects, it can be whatever
- # you want it to be (pager, etc.). This command is executed before the
- # route is dropped or after depending on the KILL_RUN_CMD_FIRST option below
- #
- #
- # I NEVER RECOMMEND YOU PUT IN RETALIATORY ACTIONS AGAINST THE HOST SCANNING
- # YOU!
- #
- # TCP/IP is an *unauthenticated protocol* and people can make scans appear out
- # of thin air. The only time it is reasonably safe (and I *never* think it is
- # reasonable) to run reverse probe scripts is when using the "classic" -tcp mode.
- # This mode requires a full connect and is very hard to spoof.
- #
- # The KILL_RUN_CMD_FIRST value should be set to "1" to force the command
- # to run *before* the blocking occurs and should be set to "0" to make the
- # command run *after* the blocking has occurred.
- #
- #KILL_RUN_CMD_FIRST = "0"
- #
- #
- #KILL_RUN_CMD="/some/path/here/script $TARGET$ $PORT$"
- #####################
- # Scan trigger value#
- #####################
- # Enter in the number of port connects you will allow before an
- # alarm is given. The default is 0 which will react immediately.
- # A value of 1 or 2 will reduce false alarms. Anything higher is
- # probably not necessary. This value must always be specified, but
- # generally can be left at 0.
- #
- # NOTE: If you are using the advanced detection option you need to
- # be careful that you don't make a hair trigger situation. Because
- # Advanced mode will react for *any* host connecting to a non-used
- # below your specified range, you have the opportunity to really
- # break things. (i.e someone innocently tries to connect to you via
- # SSL [TCP port 443] and you immediately block them). Some of you
- # may even want this though. Just be careful.
- #
- SCAN_TRIGGER="0"
- ######################
- # Port Banner Section#
- ######################
- #
- # Enter text in here you want displayed to a person tripping Kalasag.
- # I *don't* recommend taunting the person as this will aggravate them.
- # Leave this commented out to disable the feature
- #
- # Stealth scan detection modes don't use this feature
- #
- #PORT_BANNER="** UNAUTHORIZED ACCESS PROHIBITED *** YOUR CONNECTION ATTEMPT HAS BEEN LOGGED. GO AWAY."
- # EOF
